Wangtek 5150EQ Tape Drive Configuration 31040 PCBA
==================================================


Drive Info
----------
Media Capacity:     DC6250 / 250MB (QIC-150 Format)
                    DC6150 / 150MB (QIC-150 Format)
		    DC600A / 125MB (QIC-120 Format)
Recording Formats:  QIC-150 (18 Track)
                    QIC-120 (15 Track)
Read Formats:       QIC-150 (18 Track)
                    QIC-120 (15 Track)
		    QIC-24 (9 Track)
Data Transfer Rate: 90KiByte/s          
Interface:          QIC-02
Buffer:             8KiByte



Power Requirements
------------------
DC Voltages:        +12 volts +-5%, +5 volts +-5%
Ripple:             200mVpp both supplies
Current (+5V):      1.0A nom.
Current (+12V):     2.5A max., 1.0A nom.
Power Dissipation (Standby):     5.69W nom.
Power Dissipation (Operational): 15.25W nom.



Jumper Configuration  (PC Board Assy# 31040)
--------------------------------------------
[* = Default]
E1     :  * 2-3  Single Drive mode
       :    1-2  Multi-drive mode
FAO,FA1:  * No Jumpers 
       :    Jumpered for use in Multi-drive mode
FA2    :  * No Jumper  Reseved
E2     :  * Not Jumpered  Parity Checking (optional)
E3     :  * No Jumper  Logic Gnd isolated from Chassis Gnd
       :    Jumpered   Connects Logic Gnd to Chassic Gnd
HDR1   :  * No Jumpers   Factory Test
HDR2   :  * No Jumpers
E4,E5  :  * Jumpered  DO NOT CHANGE  Factory Set
E6A,E6B:    DO NOT CHANGE  Factory Set
E7     :  * Jumpered  DO NOT CHANGE  Factory Set