Wangtek 5099EN24 Tape Drive Configuration 30509 PCBA
====================================================


Drive Info
----------
Media / Capacity  : DC600A / 60MB (QIC-24 Format)
Recording Formats : QIC-24 (9 Track)
Read Formats      : QIC-24 (9 Track) 
Transfer-Rate     : 90KB/s
Interface         : QIC-36



Power Reqirements
-----------------
DC Voltages                     : +12V +/-5%; +5V +/-5%
Ripple                          : 200mV Vpp for both supplies
Current (5V)                    : 1.95A nom.
Current (12V)                   : 1A nom.; 2.5A max.
Power Dissipation (Standby)     : 5W nom.
Power Dissipation (Operational) : 28W nom.



Default Jumper Configuration (PC-Board Assy# 30509)
---------------------------------------------------
E1     : installed (Chassis Ground)
EN     : not installed
F1     : not installed
HDR1   : Pin 2 installed
HDR2   : Pin 1,2
HDR3   : Factory Set (do not change)
ADJ    : not installed
FLT    : not installed
10/5   : hard wired
TNG/TG : TNG
9/12   : hard wired
IHC    : installed
HC     : not installed